Sheet Metal Machines

We are a distinguished name in the market that is engaged in offering a wide range of trunk folding machines that is used for bending and folding purposes. Offered in the sizes of 1225 mm x 1.2 mm (18 SWG) and 1525 mm x 1.2 mm (18 SWG), these machines can be custom designed to meet the application demands of our clients.

We bring forth for our clients, a wide range of mechanical press brakes that is designed in accordance with the industry recommended guidelines. These brakes deliver good efficiency even in complex conditions and are resistant to water. We also undertake customization of these brakes as per the specific requirements of our esteemed clients.

Our profound knowledge and expertise in the industry enable us in supplying and exporting a precision engineered range of C type power press. Used for paper conversion purposes, these presses are suitable for executing accurate operations even in harsh conditions.

The details and specifications of this range are as follows:

 

PPT-150

Inclinable or 'C frame presses designs are convenient model for various applications, for easy handling of material enabling an individual to operate the machine independently and auto feed can also be provided for increased production. The advantage on inclining the machine to the back is that the material falls with weight of gravity itself which allows easy low cost workability with smooth handling of component and scrap.

The design as such ensures toughness to bear excessive jerks & load thus eliminating chances of any deflection during operation, besides box type slide gives additional grip for self alignment & accuracy plus strengthening structure of frame.
Design of four side gib ram with ram hole & T slots gives additional gripping for self alignment for longer life eliminating chances of wear and tear of punch and die ends.

Standard Features:

• Knock-out bar stands provided for top ejection of material conveniently adjustable from left & right.
• Reachard system for quick & easier setting of dies from pressure screw has greater smoothness.
• For convenient setting of various die additional bed plate stands provided with center hole as per requirement and 'T' slot.
• Jack for inclining the machine is provided to bear load & easy operation to allow the matter to fall at the back.
• High quality double & hardened rolling key.
• The continued research and development of Press & Press Tools goes a long way to strengthen more and more confidence in our presses.

We bring forth for our clients, a wide range of press brakes that is designed in accordance with the industry recommended guidelines. These brakes deliver good efficiency even in complex conditions and are resistant to water. 

We bring forth a range of CNC Syncro hydraulic press brake machines, that are suitable for a wide array of applications such as forming, punching, piercing, notching, straightening etc. Procured from our trustworthy vendors, these hydraulic press brakes are appreciated for their optimum performance, low power consumption and resistance to wear and tear. Available with various optional accessories, our range is designed in compliance with international quality standards.

STANDARD ACCESSORIES:

• Main Drive Motor.
• Selection of Auto, Manual & Adjust mode.
• HMI with 5.7" LCD. monochrome screen 6 numeric keypad.
• DA-51 PS controller from Delem for Y1. Y2 & X axis.
• Proportional hydraulics for Y1  Y2 axis.
• Individual linear encoder for Y1&  Y2 for precise synchronization of beam movement.
• AC Servo motor with resolver for back gauge drive.
• Hardened & Grounded Ball screw.
• Linear motion bearing on guide rods.
• One suitable five way. hardened & grounded die and punch".
• Manual anti deflection unit.
• Pair of sheet support.
• Movable work station with pair of foot switch.

OPTIONAL ACCESSORIES:

• Multi axes back gauge.
• Higher versions of controllers
• Special Toolings.
• Anti deflection unit, (motorized & automatic)
• Sliding sheet supports with swing-away stoppers for front gauging.
• Bed & ram horn extensions.
• Photo-electric finger safety guards.
• Hydraulic Tool Clamping.
• First fill of hydraulic oil.

Available with us a quality range of NC hydraulic press brakes, that are acknowledged amidst our clients for their excellent durability and operational efficiency. Easy to operate, these machines enable the operators to bend jobs in one set up time, thereby reducing the handling time and work-in-progress costs. Designed in compliance with international industrial standards, these can be avail in varied sizes and specifications by the clients.

Standard Features & Accessories For Basic Model

• Main drive standard make motor
• Electronic control panel with three speeds inch, single cycle and auto mode of operation.
• Two front sheet supports.
• Front operated manual back guage. With micro-adjustment swing stoppers.
• Pair  of lifting chains.
• Fine stroke adjustment rod with limit switches.
• One suitable 5 way die and balde. (Segmented or full length, EN-9 not covered under warranty).
• Movable console with emergency stop.
• Tonnage indiacating-adjusting device.
• Manual centralized lubrication system with hand pump.
• Bending Chart.

Optional Accessories:

• Ram tilting arrangement.
• Motorized back guage with DRO.
• Extra finger for standard back guage.
• Automatic lubrication system.
• Extra Depth of throat.

We provide our clients best quality NC hydraulic shearing machines, that find extensive application in different industries. Our range of shearing machines are provided with easy to use NC controlled heavy duty back gauge with PLC based controller. Precision engineered, our range is known for its dimensional accuracy and fast speed. Fabricated using quality components, our vendors also ensure that these machines are in strict adherence with industrial norms.

Standard Features & Accessories:

 

• Moving beam Synchronised by differential cylinders
• Hardened rollers guide beam for constant blade gap.
• Rake angle adjustable to suit thickness and material.
• Activation from consol and movable foot switch.
• Sheet clamped hydraulically before cut starts.
• Stroke length- position can be set for shorter jobs.
• Beam returns on releasing foot switch for smaller cuts.
• Cutting area illuminated for clear view of ends.
• First two hold downs spaced closer at both ends.
• Squaring arm 1000mm at left hand with hardened liners.
• Squaring arm 600mm at right helps distribute wear.
• Front guaging by stooper ting back guage 1000mm travel with D.R.O.
• Compact, low maintenance of Silent Hydraulic System.
• Dependable international brands of hydraulics, electrical.
• Digital stroke-counter.
• Electricals wire-labelled cleverly for trouble-shooting.

Optional Accessories:

• Automatic Contact shearing.
• Rear sheet supports.
• NC Backguage.
• Set of sheet supports 60mm.
• Cutting beam synchronised by torsion tube.
• Stroke adjustment device.
• Left squaring arm 600mm long.
• Manual backguage 600 mm.

 

We supply and export hydraulic iron workers, that are designed to provide an effective solution to all the cutting and punching problems of flat and section with satisfactory work quality. Robust in construction and compact in size, these machines are easy to install and require very little maintenance. Further, we provide these machines with various standard and optional accessories as required by clients.

Engineering Excellence with cost effective solution.

• Angle Cutting
• Channel Cutting
• Flat Cutting
• Round Bar Cutting
• Square Bar Cutting
• Punching
• Notching

Energy Mission Hydraulic Iron Worker (SIGMA) is designed to give an effective solution to all the cutting and punching problems of flat and Section with satisfactory work quality from robust and compact machine.

• Unique compact design by using ultrasonically tested steel plates.
• Five work station catering  7 different operation.
• Parallel operation of punching station with other work station gives higher productivity,
• Direct shearing avoids any waste of materials.

STANDARD ACCESSORIES:

• Main Drive motor.
• Electric Control Panel.
• Fine stroke adjustment rod with limit switch
• Manual job Clamping Device.
• Blade for Angle Cutting, Channel Cutting, Flat Cutting & Notching.
• Pair of foot Switch.

OPTIONAL ACCESSORIES:

• Manual bock gouge
• Blade for Round Bar Cutting. Square Bar Cutting. T Section Cutting
• High Speed System for more number of stroke/minute
• First fill hydraulic oil
• Extra blade for channel cutting and punching