Workshop Machines

We hold expertise in supplying and exporting a highly efficient range of workshop machines that is widely appreciated for its high performance, rigid construction, and high efficiency. These machines are aligned to the international standards of quality and are offered to our clients in original and customized specifications.

High Precision Surface Grinders

REQUEST CALLBACK

Max. Grinding Length	525 mm (21)
Table Size	200 x 500 mm
Max. Grinding Width	212 mm (8 1/2 )
Standard Magnetic Chuck Size	200x450 mm (8x18)
Floor Space	2030x1370x1630 mm (80x54x64)
Model Name/Number	ISG-820 A, 1A, 2A, 3A ED/HD

DESCRIPTIONS	MODEL	ISG-820 A, 1A, 2A, 3A ED/HD	ISG-1024 A, 1A, 2A, 3A ED/HD	ISG-1224 A, 1A, 2A, 3A ED/HD
Table Size		200 x 500 mm (8x20)	250x600 mm (10x24)	300x600 mm (12x24)
Max. Grinding Length	Longitudinal	525 mm (21)	625 mm (25)	625 mm (25)
Max. Grinding Width	Crosswise	212 mm (8 ½ )	262 mm (10 ½ )	312 mm (12 ½ )
Max. Distance From Table Surface To Spindle Centerline		400 mm (16)		450 mm (18)
Standard Magnetic Chuck Size		200x450 mm (8x18)	250x500 mm (10x20)	300x600 mm (12x24)
Longitudinal Movement of Table	Hand wheel per rev.	100 mm (4)
	Table speed elect autofeed
	Max. travel elect autofeed	525 mm (21)	625 mm (25)	625 mm (31)
	Max. travel hydraulic
	Table Speed infinitely variable hydraulic	50HZ, 5-23 m/min, 60HZ, 5-28 m/min
Cross Transverse Travel	Max. Auto transverse travel	212 mm (8 ½ )	262 mm (10 ½ )	312 mm (12 ½ )
	Handwheel per revolution	5 mm (0.2)
	Handwheel per graduation	0.05 mm (0.0012 ½ )
	Auto transverse increment	1-10 mm (0.04-0.4)
Wheelhead Vertical	Handwheel per revolution	1 mm (0.05)
Wheelhead Vertical	Handwheel per graduation	0.01
Grinding Spindle Drive	Power Rating	1 HP		2 HP
Grinding Spindle Drive	Speed	50HZ, 2850 R.P.M., 60HZ, 3450 R.P.M.
Standard Grinding Wheel	Diameter	178 mm (7)	203 mm (8)
	Width	12 mm (½ )	19 mm
	Bore	37.18 (1 ½ )
Hydraulic Motor	Power Rating	1 HP x 6P		2 HP x 6P
Longitudinal Feed Motor	Power Rating	1 HP x 6P		2 HP x 6P
Floor Space	Length x width x height Total space required	2030x1370x1630 mm (80x54x64)	2450x1500x1630 mm (96x61x64)	2500x1680x2500 mm (98x66x98)
Packing Dimensions	LxWxH	1680x1270x1650 mm (66x50x65)	1780x1320x1650 mm (70x52x65)	1780x1400x1700 (70x56x67)

MODEL	BS-2	BS-3
Stroke	10to150mm	10 to 250mm
Longitudinal Move	200 mm	230mm
Cross Movement	110mm	230mm
Speed Adjustment	3 Speed	3 Speed
Ram Adjustment	150mm	250mm
H.P.	1 H.P.	1.5 H.P.
A	210 mm	330 mm
B	310 mm	410 mm

	Centre Height 12”	Centre Height 14”	Centre Height 15”
Centre Height Over flat bed ways	304 m.m.	355 m.m.	380 m.m.
Swig over bed	580 m.m.	680 m.m.	730 m.m.
Swing over cross slide	400 m.m.	500 m.m.	550 m.m.
Swing in Gap	900 m.m.	1000 m.m.	1050 m.m.

	STD C.H,
Centre Height Over flat bed ways	165mm
Swig over bed	325mm
Swing over cross slide	175mm
Swing in Gap	510mm
Length of Gap in front of Face Pate	115mm
Width of Bed	240mm

Model	1000
Max Length of Job	1000 x 300
Segment Wheel Size	350
Table Length	1160
Table Width	300
Max Distance Grinding Wheel To Table Surface	500

POWER
Grinding Wheel Motor	3 HP/5 HP (700 & 1400 RPM)
Hydraulic Motor	1 HP
Rapid Feed Motor	0.5 HP.
Coolant Pump Motor	0.8 HP

PARTICULARS	8'C200mm	8'/200mm	10'250mm	12'/300mm	16'/400mm
No. of stroke per minute	95	100	90	85	70
Electrica motor Required	1.0 H.P.	1.0 H.P.	1.5 H.P.	2.0 H.P.	3.0 H.P.
R.P.M.	1440	1440	1440	1440	960
Blade Size	16x1 ¼	16x1 ¼	18x1 ¼	20x1 ½	24x1 ½
Capacity of Round Bars	200 mm	200 mm	250 mm	300 mm	400 mm
Capacity of Square Bars	150 mm	150 mm	200 mm	250 mm	350 mm
Weight	275 Kgs.	365 Kgs.	400 Kgs.	500 Kgs.	950 Kgs.
Length	975 mm	975 mm	1100 mm	1225 mm	1370 mm
Breadth	405 mm	405 mm	405 mm	405 mm	640 mm
Hydraulic Cylinder	One	One	One	One	Two
Height	790 mm	790 mm	865 mm	880 mm	1120 mm
V-belts Required	C-53 1 No.	B-52 2 No.	B-54 2 No.	B-54 2 No.	B-75 2 No.
	C-54 1 No.	C-55 1 No.	C-57 1 No.	C-70 1 No.	B-65 2 No.
	2260 1 No.	2260 1 No.	2260 1 No.	2260 1 No.	2325 1 No.

MODEL	R-25	R-40
Drilling Capacity	25mm	40mm
Pillar Dia.	130	170
Spindle Nose	MT-3	MT-4
Dist. from Spindle to Pillar Surface	875	995
Spindle Travel	185mm	215mm
No. of Spindle Speed	8	8
Spindle Speed (RPM)	130-2300	70-2000
Drilling Motor	1 & 0.5 H.P.	1.5&0.5HP

MODEL	AC-1 HS	AC-2 HS	AC-3 HS	AC 4 HS	AC-5 HS
Round mm	175	300	350	400	450
Square mm	150 X150	250 X 250	300X300	350X350	400 X 400

Drive motor	1.0 HP. 1440 RPM	2 HP. 1000 RPM	2 HP. 1000 RPM	2 HP. 1000 RPM	2 HP. 1000 RPM
Coolant Pump	0.15 H.P. 440 Volts	0.15 H.P. 440 Volts	0.15 H.P. 440 Volts	0.15 H.P. 440 Volts	0.15 H.P. 440 Volts
Blade Speed Meter/minute	20	20	20	20	20
	35	35	35	40	40
	55	55	55	60	60
	75	75	75	80	80

Saw Blade-Carbon or Bi-Metal mm	3000X27 X0.9	3810 X 27 X 0.9	4100X34X1.1	4420 X 41X1 .1	4570X41X1.1
Floor Space	1630X580X895	2400X830X 1050	2650X830 X1200	2700X830X 1200	2750 X 830 X 1200
Net Wright	322	761	821	900	950
Packed Weight kg	431 Approx	831 Approx	890 Approx	950 Approx	1000 Approx

MODEL	TCS-18	TCS-24	TCS-30	TCS-36
Machine Size	18"	24"	30"	36"
Maximum Stroke	20"	26"	32"	38"
Len of Ram	36"	50"	58"	66"
Max. Dist. of Table to ram	15"	19"	20"	20"
Mm Dist of Table to Ram	2	2	2	2
Max. Vertical travel to tool slide	4	7	7	7
Len and width of table top.	18 x 12	24 x 15	30 ½ x 16	36 x 18
Len and width of table side	30 x 11	37 ½ x 12	44 x 13	48 x 14
Len of cross slide	30	37 ½	44	48
Width of Ram	10	12.5	12.5	13
No of Speeds	3	4	4	4
HP Required (1440)	2	2	3	5

Workshop Machines

High Precision Surface Grinders

High Precision Surface Grinding Machine

Slotting Machine

Cone Pulley Extra Heavy Duty Lathe Machine

Cone Pulley Light Lathe Machine

Hi - Cut Machine Tool

Hydraulic Cylindrical Grinder

Hydraulic Hacksaw Machine

Geared Radial Drilling Machine

Metal Cutting Horizontal Bandsaw Machine

Shaping Machine

Pillar Drilling Machines

Cone Pully Heavy Duty Lathe Machine

Universal Swaging Machine Motor Operated

Deepthroat Swaging Machine Hand Operated

Deepthroat Swaging Machine Motor Operated

Universal Swaging Machine Hand Operated

Workshop Machines

Workshop Machines

Explore More Products